At present, the market development of machine-made sand is very hot, and it is impossible to understand the production process of machine-made sand! The production process of manufactured sand mainly includes dry sand production line and wet sand production line. Tangshan Xinye will introduce some common problems:

what are the advantages of dry production process?

1. The water content of manufactured sand produced by dry sand production is generally less than 2%, and commercial or dry mixed mortar can be used directly.

2. The content of stone powder in the finished sand can be regulated, which can be recycled and utilized in a centralized way to reduce the emission of dust.

3. Less water resources are used in the production process of dry sand production, and little or no water is used, which can save water resources.

4. Dry sand making is conducive to several operation controls and automatic management.

5. It is not affected by region, drought and cold seasons.

 What should be paid attention to in wet production process?

1. Wet sand making needs to consume a lot of water resources.

2. The water content of the finished sand is high and needs to be dehydrated.

3. The fineness modulus of finished sand is too coarse, and fine sand may be lost during sand washing, resulting in low sand output.

4. A large amount of sludge and sewage may be produced in the process of wet sand making, polluting the environment.

5. Wet sand making cannot be produced normally in dry, rainy or frozen seasons.