Product
The KP series Cone crusher
High-performance medium/fine crushers
The KP series cone crusher is newly developed and produced by this company by absorbing the advanced concepts of foreign conecrushers, representing the highest level of the diversity, efficiency and economy of the crusher industry. This success comes from thiscompanys long-term commitment to advanced design and constant product development. The KP series cone crusher is providedwith excellent features to enable users to believe that the crushers purchased by them can achieve the best benefits in operation.The KP series cone crusher features reliable performance, high crushing capacity and high output, with the maximum output up to1,500t/h, which can fully meet the requirements of small and mediurri-sized crushing plants (sections).
High working efficiency
Due to the liner construction and optimized design of the kP series cone crusher its working efficiency is much higher. Wwith theprecisely-machined surface, the replacement of liner is convenient and safe, for it only requires the replacement of the fioed conethus to realize the change into different chamber shapes. The crushing chamber shape is optimized so as to improve the utilizationrate of the liner. Furthermore, this crusher also features the effective overoad protection, simple structure and high reliability.
Wide range of application
The KP series cone crusher has the following performance characteristics, so as to make it widely applicable:
1. The same main unit can be equipped with different types of liners for the crushing chamber;
2.The crushing stroke adjustment is convenient and quick;
3.The automatic control is applied to maintain the crusher always under the best operation conditions.
Asy maintenance and low maintenance cost
The KP series cone crusher has the following characteristics, so as to realize the quicker servicing and maintenance:
1.The compact design reduces the size of the crusher lifting equipment and the area of the site required
by the maintenance operation;
2.The lubrication and hydraulic adjustment systems are integrated to reduce the variety and quantity of oil
3.Less daily maintenance is required for the crusher;
4.The crushing chamber shape is optimized by computer, the liner is evenly worn, and the wear cost ismuch lower to ensure the continuous production of high-quality stone.
Lubricating system
The compact and independent highy/low pressure lubrication device is composed of:
1.Low-pressure lubrication pump and high-pressure discharge port adjustment pump;
2.Lubricating oil filter and its monitoring system;
3.Lubricating oil, temperature, pressure and oil flove monitoring system;
4.Air-cooled cooler;
5. lmmersion type heater, used for operations in cold areas, enabling the crusher to be started quickly.
Laminating crushing and good particle shape
he kP series cone crusher utilizes and realizes the laminating crushing . The crushing of particles occurs not only between thepartidles and the liner,but also between partides. When the particles are pressed against each other, the flat and long strip partidlesare broken along theit weak sections,and each rock partide is broken for mamy times in the crushing chamber, due to this reason,the product particle shape tends to be more cubic.
Product specification:
Density of 1.6uim ,while the actualoutput will vary vith the feed,the particlesize composition of the rotk, moisture content and so on.Note the autout discharge portand ather paramaters as gi on in the table abave ane lased an the pamnetis ot the granite with a fedium hardness and the
